Alfa Romeo 166 Specifications download pdf (Page 216)

215

CHECKING POWER STEERING

OIL LEVEL

Fig. 8: JTD 20V Multijet version

Fig. 9: JTD 20V Multijet version

Fig. 10: 3.2 V6 24V version

Check that the oil in the reservoir is at

the maximum level.

This operation must be carried out with

the car on level ground and when the en-

gine is stationary and cold.

fig. 8 - JTD 20V Multijet version

fig. 9 - JTD 20V Multijet version fig. 10 - 3.2 V6 24V version

On JTD 20V Multijet versions access to

the reservoir is gained by removing the cov-

er (A-fig. 8) after turning the fastening

pins withdraw the tube (B-fig. 9).

Slacken the cap (C-fig. 9-10) and

check that the level corresponds to the

reference notch of the maximum level on

the dipstick which is an integral part of

the cap.

TOPPING UP THE POWER

STEERING OIL

If the level of the oil in the power steer-

ing reservoir falls below the specified lev-

el, top up only with one of the products

listed in he table of “Fluids and lubri-

cants” in the “Technical specifications”

chapter as follows.

– Start the engine and allow the oil in

the reservoir to settle.

– When the engine is running turn the

steering wheel lock to lock a few times.

– Top up the MAX level notch and then

replace the cover.

A0D0115m

A0D0101m

A0D0116m

1 2 ... 211 212 213 214 215 216 217 218 219 220 221 ... 271 272

No comments

Alfa Romeo 166 Specifications Page 216