172
Low beam headlights
To replace the bulb (Type D – H7,
55W):
– Remove the engine compartment cov-
er after turning the fastening pins.
– Remove the rubber cap (A- fig.
39) by pulling the tab (B).
– Disconnect the snap-fitted connector
(C- fig. 40).
–- Release the clip (D).
– Remove the bulb (E- fig. 41).
– Fit the bulb in the headlight reflector
making the notch coincide with the corre-
sponding groove.
– Lock the bulb with the clip.
– Fit the connector to the new bulb.
– Fit the rubber cap.
– Refit the engine compartment cover
and secure it by turning the fastening
pins.
A0D0036m
fig. 38
A0D0072m
fig. 39
A0D0074m
fig. 41
A0D0073m
fig. 40
Comments to this Manuals