Alfa Romeo 166 Specifications download pdf (Page 160)

159

Do not use the jack for

higher capacities than

stated on its label.

Absolutely never tam-

per with the inflation

valve. Do not insert

tools of any kind be-

tween the rim and the tyre.

Routinely check that the

pressure of tyres and s-

pare wheel is as speci-

fied in the “Technical specifica-

tions” chapter. Raise the car only

laterally. The car must absolutely

never be raised placing the plate

of the workshop lift arm under

the aluminium crossmember of

the rear suspension.

CHANGING A WHEEL

Please be informed that:

– The jack mass is 2.100 kg.

– The jack requires no adjustment.

– The jack cannot be repaired, in the

event of breakage it must be replaced by

another original one.

– No tools other than its operating

crank can be fitted to the jack

To change a wheel proceed as follows:

– Stop the car in such a position that it

is not dangerous for the traffic where it is

possible to change the wheel safely.

Where possible, park on a level, compact

surface.

– Engage the handbrake

– Engage 1st gear or reverse. For cars

with automatic gearbox set the lever to

position P.

– Open the boot.

– Fold forward the boot mat (A-

fig. 1).

– Slacken the ring nut (A-fig. 2) and

remove the spare wheel.

– Take the tool bag (A-fig. 3) and

bring it near to the wheel to be changed.

The jack only serves for

changing wheels on the

car with which it is provided or on

cars of the same model. It must not

be used for other purposes such as

for instance raising cars of other

models. In no case should it be used

for repairs under the vehicle.

WARNING

P4C00057564PGSm

fig. 1

1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 271 272

Comments to this Manuals

No comments