Alfa Romeo 166 Specifications download pdf (Page 161)

160

– Remove the wheel cap (A-fig. 4)

(only for versions with steel rims) lever-

ing on the edge with the flat-tipped

screwdriver provided in the tool bag.

– Using the L-wrench (B-fig. 5) pro-

vided, loosen the fastening bolts (A) by

about one turn.

– Position the jack under the car next

to the wheel to be replaced (fig. 6):

Position 1: changing a rear wheel;

Position 2: changing a front wheel.

– Turn the knob (A-fig. 7) of the jack

to extend it until the pin (B), on the on

the upper part of the jack inserts correctly

in the seat on the body (C).

– Fit the L-wrench (A-fig. 8) on the

jack pin (B).

– Work the jack and raise the car, until

the wheel is a few centimetres above

ground.

– Completely unscrew the fastening

bolts (A-fig. 9) and remove the wheel.

– Make sure the spare wheel is clean

and free of impurities on the hub contact

surface which could cause slackening of

the fastening bolts later.

– Install the spare wheel making the

hub pin (A-fig. 10) coincide with one

of the holes (B-fig. 11) of the wheel.

A0D0038m

fig. 4

A0D0132m

fig. 5

346PGSm

fig. 2

A0D0144m

fig. 3

1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 271 272

No comments

Alfa Romeo 166 Specifications Page 161